GE DR-1200 - Manual (Page 7)

Rugged Dome Installation Manual Preparing the Housing and Camera
1038346B / February 2003 7
To install the UTP module see Figure 3 and Figure 4 and perform the
following.
M3.5x3 fillister-
head screw
Figure 3. Inserting the mounting screw into the UTP module
1) Insert the M3.5x3 fillister-head mounting screw into the middle right
hole of the module.
2) Screw the UTP module onto the UTP module mounting post
(Figure 1) in the housing.
Connection to the PC assembly
Cable to terminal board Unshielded twisted-pair module
Figure 4. Installing and connecting unshielded twisted-pair module.
3) Attach the UTP cable to the PC assembly.