Nmea 2000 pgn information – Garmin GMI 10 User Manual
Page 6
GMI 10 Installation Instructions
If your NMEA 0183-compatible device has only one transmitting wire (Tx), connect it to the brown wire (Rx/A) from
the GMI 10, and connect the green wire (Rx/B) from the GMI 10 to NMEA ground.
Wiring the GMI 10 to a NMEA 0183 Device with One Transmitting Wire
>
>
+
-
BROWN
GREEN
WIRE
COLOR
WIRE
FUNCTION
POWER
NMEA GND
Tx
NMEA 0183-
Compatible
Device
GMI 10
Device
Battery
12 Vdc
BLACK
POWER GND
NMEA 000 network
NOTE: When connecting a NMEA 0183 device with only one transmitting (Tx) line or with only one receiving (Rx)
line, the NMEA 2000 bus and the NMEA 0183 device must be connected to a common ground.
NMEA 2000 PGN Information
Use this table to determine the approved NMEA 2000 PGN information that can be received and transmitted by a
GMI 10 when communicating with a NMEA 2000-compliant device.
Receive
Transmit
059392
ISO Acknowledgment
059392
ISO Acknowledgment
059904
ISO Request
059904
ISO Request
060928
ISO Address Claim
060928
ISO Address Claim
126208
NMEA - Command/Request/Acknowledge Group Function
126208
NMEA - Command/Request/
Acknowledge Group Function
126464
Transmit/Receive PGN List Group Function
126992
System Time
126464
Transmit/Receive PGN List
Group Function
126996
Product Information
127250
Vessel Heading
126996
Product Information
127489
Engine Parameters - Dynamic
127505
Fluid Level
128259
Speed - Water Referenced
128267
Water Depth
The GMI 10 is
NMEA 2000 certified
129025
Position - Rapid Update
129026
COG & SOG - Rapid Update
129029
GNSS Position Data
129044
Datum
129283
Cross Track Error
129284
Navigation Data
129285
Navigation - Route/WP information
129539
GNSS DOPs
129540
GNSS Sats in View
130306
Wind Data
130310
Environmental Parameters