Garmin GMI 10 - Manual (Page 6)

 GMI 10 Installation Instructions
If your NMEA 0183-compatible device has only one transmitting wire (Tx), connect it to the brown wire (Rx/A) from
the GMI 10, and connect the green wire (Rx/B) from the GMI 10 to NMEA ground.
Wiring the GMI 10 to a NMEA 0183 Device with One Transmitting Wire
> >
+
-
BROWN
GREEN
WIRE
COLOR
WIRE
FUNCTION
POWER
NMEA GND
Tx
NMEA 0183-
Compatible
Device
GMI 10
Device
Battery
12 Vdc
BLACK POWER GND
NMEA 000 network
NOTE: When connecting a NMEA 0183 device with only one transmitting (Tx) line or with only one receiving (Rx)
line, the NMEA 2000 bus and the NMEA 0183 device must be connected to a common ground.
NMEA 2000 PGN Information
Use this table to determine the approved NMEA 2000 PGN information that can be received and transmitted by a
GMI 10 when communicating with a NMEA 2000-compliant device.
Receive Transmit
059392 ISO Acknowledgment 059392 ISO Acknowledgment
059904 ISO Request 059904 ISO Request
060928 ISO Address Claim 060928 ISO Address Claim
126208 NMEA - Command/Request/Acknowledge Group Function 126208 NMEA - Command/Request/
Acknowledge Group Function
126464 Transmit/Receive PGN List Group Function
126992 System Time 126464 Transmit/Receive PGN List
Group Function
126996 Product Information
127250 Vessel Heading 126996 Product Information
127489 Engine Parameters - Dynamic
127505 Fluid Level
128259 Speed - Water Referenced
128267 Water Depth The GMI 10 is
NMEA 2000 certified
129025 Position - Rapid Update
129026 COG & SOG - Rapid Update
129029 GNSS Position Data
129044 Datum
129283 Cross Track Error
129284 Navigation Data
129285 Navigation - Route/WP information
129539 GNSS DOPs
129540 GNSS Sats in View
130306 Wind Data
130310 Environmental Parameters