Removing and replacing doors, Installation instructions – GE 23 User Manual

Page 19

Advertising
background image

19

Installation Instructions

DISCONNECT THE POWER
COUPLING (on some models)

If the refrigerator has a water dispenser,
there is a power line (harness) from the
cabinet into the bottom hinge on the
freezer door that must be disconnected.
To disconnect, pull apart at the coupling.

4

Bottom
freezer
hinge

DISCONNECT THE ELECTRICAL
CONNECTORS (on some models)

If the refrigerator has a refreshment
center,
there are electrical connectors
(harnesses) from the cabinet into the
bottom hinge on the refrigerator door
that must be disconnected.
To disconnect, pull apart each connector.

5

Bottom
refrigerator
hinge

CLOSE THE FREEZER AND
REFRIGERATOR DOORS

6

REMOVE THE FREEZER DOOR

Remove the freezer door top hinge cover
by either squeezing it and pulling it up or
by prying it off with a plastic putty knife.

Remove the two 5/16” hex head screws,
then lift the hinge straight up to free the
hinge pin.

Open the freezer door to 90.°

7

A

C

B

5/16” Hex Head

90°

Advertising