GarrettCom Magnum S14 - Manual (Page 13)

S14 Convenient Switches Installation and User Guide (06/04)
6
www GarrettCom com . .
(STP) and unshielded (UTP) Cat 3,4,5 cable. For POE pass-through option on H
and P models, request quote.
Switches: Port # 2 controlled by an “A-FF” switch, provided next to it.
“A” enables auto-negotiation and auto-cross (MDIX)
“FF” enables Full Fixed, 100Mb Full Duplex mode
LED Indicators (Dual- front and end, port #4 has front only)
POWER: Steady On when power applied
10/100: = 100Mbps; OFF = 10 Mbps
LK/ACT: Steady On for LINK with no traffic, blinking indicates port
is transmitting / receiving.
F/H: ON = full-duplex, OFF = half-duplex
Mounting option for S14 Family of Switches:
Metal Mounting clips for panel mounting : included
DIN-Rail mounting option: Model # DIN-RAIL MC2 (see Section 3.4)
Rack-mount option: MC14-TRAY, see http://www.garrettcom.com/mc_tray.htm