GarrettCom Magnum S14 - Manual (Page 36)

S14 Convenient Switches Installation and User Guide (06/04)
29
www GarrettCom com . .
Installation of the Magnum S14-Series Switches is a simple procedure. The
installation location is dependent upon the physical layout of the Ethernet network and
associated cabling. Make sure the unit is installed in a location that is easily accessible to
an AC power outlet or power strip, and where convection cooling is not inhibited. The
green Power (PWR) Led must turn ON, when power is applied through the internal DC
input 12V, 24V or –48V DC or external AC through 9V DC jack.
3.2 MC14-TRAY for Rack Mounting of S14-Series Switches
For 19” rack-mounting of Magnum FT14-series Media Converters, a rack-mount
tray is available, MC14-TRAY. The Media Converter units are mounted with their
RJ-45 port and DC power jack in the back, with either fiber or BNC cable in the
front. Any mix of the FT14-type Media Converters may be placed on a tray, up
to a maximum of 16 units. (The mounting spaces of the MC14-TRAY are specific
to the “S14”-series, and do not permit other models).