Connections & setup, Plug in the tv, Put batteries in the remote – GE RCA High Definition Television User Manual

Page 20: Turn on the tv, 18 chapter 1

Advertising
background image

Connections & Setup

18

Chapter 1

Plug in the TV

Plug the fl at end of the cable into the power jack on the back of the TV. Then plug
the other end of the power cord into an appropriate wall outlet. Be sure to insert
the plug completely. Do not plug the TV into an outlet controlled by a light switch.

Put batteries in the remote

• Remove the battery compartment cover from the back of the remote by

pushing the tab and lifting off the cover.

• Insert 2 fresh batteries. Make sure the polarities (+ and -) are aligned correctly.

• Replace the cover.

How to Use the Remote Control to
Complete the Initial Setup

The technical term is “Navigation” – how you move through the on-screen menus.
The theory is the same throughout the menu screens: highlight your choice and
select it.

To highlight a menu item, press the arrow buttons on the remote to highlight one
of the items listed on the screen. Use the up or down arrow button to move up or
down. Use the right or left arrow button to move right or left.

To select the item that you’ve highlighted, press OK.

Note: Highlighted means that the menu item stands out from other menu
items on the list (appears darker, brighter, or a different color).

Turn on the TV

Press TV on the remote, or press the Power button on the TV’s front panel.

Note: Pressing the TV button turns on the TV and puts the remote into TV
mode. “TV mode” means that the buttons on the remote control operate the
TV’s functions.

DVD

AUX•HD

TV

CH

ON•OFF

CLEAR

MENU

ok

MUTE

VOL

GO BACK

TV button

Arrows

OK
button

MENU

ok

Advertising