GE RCA High Definition Television - Manual (Page 24)

22 Chapter 2
Using the Remote Control
The Buttons on the Remote Control
(0-9) Number Buttons Enter channel numbers and time settings directly through the
remote control.
To enter a one-digit channel, enter a zero fi rst. To enter a two-digit channel, press the
two digits. To enter a three-digit channel, press and hold the 1 button until 1 and two
dashes (– –) appear, then add the second two digits. Example: to tune to channel 123,
press and hold 1 until 1– – appears, release the 1 button and then press 2 and 3.
ANTENNA In TV mode, this button switches between your TV's analog and digital
tuners. In VCR mode (if programmed), this button works as a TV/VCR button for some
VCRs. In SAT mode (if programmed), this button works as a TV/SAT button for some
satellite receivers.
Arrows Used to highlight different items in the TV menu and to adjust the menu
controls.
AUX•HD Puts the remote in AUX/HD mode. As a default, this button controls some
models of RCA HDTV Tuners. It can also be programmed to operate some brands of an
additional remote-controllable components.
CC Displays a reduced Closed Captioning menu, allowing you to turn closed
captioning on and off or change the closed captioning mode. Use the up and down
arrow buttons to highlight the setting you want to change. Use the left and right arrow
buttons to change the highlighted setting.
CH + or CH - Scans up or down through the current channel list. Press once to
change the channel up or down; press and hold to continue changing channels. In
DVD mode (if programmed), these buttons work as chapter advance or chapter reverse
buttons with some DVD players.
CLEAR Removes any menu or display from the screen and returns you to normal CLEAR CLEAR
viewing.
DVD Puts the remote in DVD mode and, if Autotuning is enabled, will turn on the TV
and tune to the correct input channel.
FORMAT Changes the current format (aspect ratio and magnifi cation) of the image on
the screen. Format control is not available for digital 16:9 broadcasts.
FREEZE When watching TV, freezes the picture until you press any button on the
remote to resume normal TV viewing. The FREEZE feature automatically times out after
a short time. Please note that when you "unfreeze" you go back to live programming
(skipping any programming that occurred during the freeze).
Note: The FREEZE feature does not work on signals from the DVI-HDTV or CMP1
inputs in progressive scan (480p) or HDTV (1080i) modes. It also does not work on
digital channels.
Do not use the Freeze feature for an extended period of time. This can cause the
image to be permanently imprinted on the picture tube. Such damage is not covered
by your warranty. Press any button to unfreeze the picture at any time.
GO BACK Returns you to the previous channel. GO BACK GO BACK
GUIDE Brings up the Channel Guide menu. Channel Guide Channel Guide
Indicator Indicates the programming mode when programming the remote to control
components. The indicator lights up when you press a valid button on the remote. It
fl ickers when the remote batteries are low and you press a button.
Indicator
FORMAT FORMA FORMA