GE RCA High Definition Television - Manual (Page 34)

Using the TV’s Features
32 Chapter 3
4. Choose which component button you would like to set:
Set VCR Channel Lets you set up the channel the TV tunes to when you
press the VCR button on a separate universal remote.
Set AUX/HD Channel Lets you set up the channel the TV tunes to when
you press the AUX•HD button.
Set SAT Channel Lets you set up the channel the TV tunes to when you
press the SAT button on a separate universal remote.
Set DVD Channel Lets Set DVD Channel Set DVD Channel you set up the channel the TV tunes to when you
press the DVD button.
Go back
Channel setup
Preferences
Closed caption
Autotuning
Convergence
...
...
...
...
...
Setup
Press < or > key to select the input
to be used for the AUX/HD key.
Go back
Set VCR channel
Set AUX/HD channel
Set SAT channel
Set DVD channel
VID1...
DVI...
CMP1...
VID2...
Tu
ning
Important Note About Autotuning
The Autotuning feature is confi gured to
work with universal remote controls that are
capable of controlling up to four component
devices in addition to the TV.
The remote that came with your HDTV
has only two programmable component
buttons—the DVD and AUX•HD buttons.
In the Autotuning menu, use the options “Set
DVD Channel” and “Set AUX/HD Channel”
with the remote that came with your HDTV.
The other Autotuning options are for
universal remotes with additional component
buttons.
Your remote's component buttons
TV
ON•OFF DVD
AUX•HD
Autotuning
The autotuning feature automatically tunes the TV to the correct channel/input
for different components you have connected to your TV (like a VCR, DVD
player, etc.) When you set up autotuning in the menu system you don’t have to
remember to change your TV to the CMP1 input, for example, when you want to
watch a DVD on your DVD player.
Why You Should Use the Autotuning Feature
Autotuning lets you go directly to the input you assign to a component button. For
example, if you have a DVD player connected to the CMP1 input, you can have
the autotuning feature go directly to the CMP1 input when you press the DVD
button (instead of going through the inputs until you fi nd the DVD signal).
How to Set Up the Autotuning Feature
The way you set up the autotuning feature in the TV’s menu corresponds to
the component buttons on the remote and the way you have each component
connected to your TV. When you set up autotuning, you’re telling the TV what
channel/input to tune to when you press the DVD or AUX•HD button on the
remote control.
1. Press MENU (the MAIN MENU appears).
2. Highlight Setup and press OK on your remote control. Setup Setup
3. Highlight Autotuning and press OK. Autotuning Autotuning