Grundig DUO GRP6000 - Manual (Page 17)

You can use PARENTAL CONTROL to create viewing restrictions on your
receiver. First create your own Personal Identification Number (PIN) as shown in
the Advanced Setup section of this guide. You can now create censorship levels
or Lock out channels completely.
Press » «, select » PARENTAL CONTROL « from the » SETUP « menu and
press » OK «.
Now enter your PIN. The menu will appear.
Censorship
If the censorship level does not match the censorship rating of the program, access
will be denied, the user is prompted for the PIN before access is granted.
Press » $ « to set the censorship level to » NO BLOCK «, » AGE 5 «, » AGE 10 «,
» AGE 15 «, » AGE 18 «, » TOTAL BLOCK «.
Lock services
From the » PARENTAL CONTROL « menu, select » LOCK/UNLOCK
SERVICES « and press » OK «.
To Lock/Unlock services scroll through the list of services with » ! «/» " « and
Lock/Unlock the highlighted service with » OK «.
To exit menu press » «.
To view a locked channel the PIN must be entered. Once entered, all locked
channels will be unlocked until the receiver is next in standby.
Should any censored or locked channel be selected using the TIMER
PROGRAMMING function, you must enter the PIN before the event is stored.
Should any channel be censored or locked after the TIMER PROGRAMMING
function has been set, you will be prompted for the PIN before access is granted.
Entering an incorrect PIN will only allow the status of the channel to be displayed
upon a blank screen.
17
PARENTAL CONTROLS
TV MODE