Grundig DUO GRP6000 - Manual (Page 28)

Audio CD features
An audio CD is identified by this logo.
Audio CDs contain only music recordings. They can be played in the normal
manner on a HiFi system.
Before playback
Preparation
1 Switch on the television and select the channel for the Receiver/Player.
– With this you can see the Receiver/Player displays.
2 If a HiFi system is connected to the Receiver/Player, switch on the HiFi system
and select the appropriate audio input for the Receiver/Player.
3 Press » « to switch on the Receiver/Player.
Press » « to switch to Disc mode.
– Display on the Receiver/Player and television »no disc«.
Inserting an audio CD
1 Press » « on the Receiver/Player.
– The disc tray opens.
2 Insert the audio CD in the disc tray, with the labelling facing upwards.
3 Press » «.
– The CD is loaded.
– The receiver-player displays the number of tracks and the total playing time
of the CD.
Calling up the info line
1 Press » OK « to call up the info line.
– The info line is displayed. Here you find information about the CD, including
the number of tracks, the playing time of the tracks, the playing time
remaining, the audio system and the data flow.
Audio functions
Playing back a track
1 Start playback with » ! «.
– Playback stops automatically at the end of the CD.
2 To pause playback, press » ❙❙ «.
3 Press » ! « again to resume playback.
28
AUDIO CD PLAYBACK
DISC MODE
gen no disc
gen .
...
gen
ə
5
Einstellungen
CD-DA Track: 1 /18 00:00:01 00:03:24
F LDCD PCM 2.0 Mbit/s
gen
ľ
gen II
gen
ľ
9
ə
ə