GE ZSA2201 - Manual (Page 29)

29
The clock must be set before you can use
your oven for the first time. When setting the
clock time for the first time go directly to step
two.
1. To change the clock time, press the
SETTINGS pad and turn the dial to CLOCK
SETTINGS. Select SET TIME.
2. Turn the dial to set hours. Press the dial to
enter. Note: Setting hours sets AM/PM.
3. Turn the dial to set minutes. Press the dial
to enter.
Other Advantium Features
Advantium Oven
Clock
Auto
Conversion
Auto conversion automatically reduces the
convection baking temperature. You still
input the recipe temperature and the oven
control does the rest.
To change the setting, press the SETTINGS
pad and turn the dial to AUTO CONVERSION.
Press the dial to enter. Turn the dial to
change the setting to CONVERSION ON or
CONVERSION OFF. Press the dial to enter.
Display
On/Off Use this feature to turn your clock display on
or off.
Press the SETTINGS pad, turn the dial to
select DISPLAY ON/OFF. Turn the dial to
select CLOCK DISPLAY ON or CLOCK DISPLAY
OFF. Press the dial to enter.
Beeper
Volume
Reminder
Turntable
On/OFF
Use this feature to adjust the volume of the
beeper. You can even turn it off.
Press the SETTINGS pad, turn the dial to
select BEEPER VOLUME, press the dial to
enter. Select the beeper volume, press the
dial to enter.
Use this feature to set an alarm beep to
sound at a specific time of day.
1. Press the SETTINGS pad, turn the dial to
select REMINDER and press the dial to enter.
2. Select SET REMINDER and press the dial to
enter.
3. Turn the dial to set the time hour and
minutes, press the dial to enter. NOTE:
Setting the hours set AM/PM.
To turn off the Reminder, press the SETTINGS
pad, turn the dial to select REMINDER and
press the dial to enter. Turn the dial to select
CLEAR REMINDER and press the dial to enter.
To check the Reminder time, press the
SETTINGS pad, turn the dial to select
REMINDER and press the dial to enter. Turn
the dial to select REVIEW REMINDER and
press the dial to enter. The display will show
the Reminder time.
Use this feature to keep the turntable from
turning when using a dish is too large to
rotate in the cavity.
TURNTABLE ON/OFF is not a permanent
setting.
Press the SETTINGS pad, turn the dial to
select TURNTABLE ON/OFF and press the dial
to enter. Turn the dial to select TURNTABLE
ON or TURNTABLE OFF, press the dial to
enter.
Note:
• The turntable will not turn off in Speedcook,
Broil, Toast, or Microwave Sensor modes.
• A cooking cycle must be started within 5
minutes of turning the turntable off, or the
turntable will reset to the on setting.
• The turntable will also remain off for
cooking cycles started within 5 minutes of
the end of any cooking cycle for which the
turntable was off.