GE 10 DCB - Manual (Page 12)

REMOVE THREE SHIPPING PADS
INSIDE AIR CONDITIONER NEXT TO
COMPRESSOR
Installation Instructions
REMOVE LOCKING PLATE ON
FRONT LEFT SIDE 1 REINSTALL LOCKING PLATE WITH
TAB BEHIND WALL CASE FLANGE.
TIGHTEN SCREW
Locking
plate
Remove
screw
INSTALLING A J-MODEL IN AN EXISTING WALL CASE
Read these instructions completely and carefully.
Remove
shipping
pads
CAREFULLY SLIDE AIR
CONDITIONER BACK INTO CASE
Make sure that the tubing on the unit does
not touch the wall case and that the case
installation is secure.
2
3
12
WHEN WALL OUTLET IS TO LEFT,
EXTEND CORD UNDER UNIT AND
HOLD IT IN PLACE WITH CLAMP
Power
cord
Clamp
ATTACH FRONT GRILLE
An opening for the power cord is on the
bottom of the front grille.
6
ATTACH POWER CORD TO BASE
PAN WITH CLAMP
Clamp
Power
cord
Base pan
4
5
7