GE 10 DCB - Manual (Page 19)

Installation Instructions
19
REPLACE AIR CONDITIONER IN
CASE
Carefully slide the air conditioner back into
the case.
Attach the power cord to the base pan with
the clamp.
When the wall outlet is to the left, extend the
cord under the unit and hold it in place with the
clamp.
Reinstall the locking plate with the tab behind the
wall case flange. Tighten the screw.
Reattach the front grille. An opening for the
power cord is on the bottom of the front grille.
Fill holes and cracks with caulking provided by
the installer
.
INSTALL WINDOW GASKET AND
LOCKING BRACKET
Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from
getting into the room.
Attach the window locking bracket with 1 type E
screw.
8
A
B
9
A
B
C
C
D
E
F
Clamp
Power cord
Base pan
Power cord
Clamp
Locking
plate
Tighten
screw