GE 10 DCB - Manual (Page 14)

Installation Instructions
14
WINDOW INSTALLATION—OPTIONAL
FOR MODELS AJES06LSB, AJES08ASB, AJES10DSB and AJHS08ASB
Read these instructions completely and carefully.
Air conditioner
Type C (painted) (6)
Type D (2)
Type E (4)
Large washer (2)
Adjusting bolt (2)
Lock nut (2)
Spacer (2)
Support bracket hardware
Type A (9)
Type B (2)
Sill support
bracket (2)
2 angles
(left and
right hand)
Case side
gasket (2)
Spring
clip (4)
Window
locking
bracket
Vinyl window
gasket
Bottom window gasket
Filler
Panels
Cut panels
and
discard
center
piece
Case top gasket
Foam top
window gasket
B
Right
side
A
Left side
(holes are on the left)
(holes are on the right)
WINDOW REQUIREMENTS
• These instructions are for a standard double-hung
window. You will need to modify them for other
types of windows.
• The air conditioner can be installed without the
accordion panels if needed to fit in a narrow
window. See the window opening dimensions
to the right.
• All supporting parts must be secured to firm wood,
masonry or metal.
• The electrical outlet must be within reach of the
power cord.
1
Window opening dimensions are for a
standard double-hung window.
17 ″ min.
31 ″ to 43″
(With filler panels)
26 1 ⁄
4
″ min.
(Without filler panels)