Grizzly G1005Z - Manual (Page 13)

G1005Z Mill/Drill
-11-
SECTION 3: SET UP
The following items are needed to complete the
set up process, but are not included with your
machine:
Description Qty
• Safety Glasses (for each person) .............. 1
• Rubber Mallet ............................................. 1
• Hex Wrench 5mm ...................................... 1
• Wrench 17mm ............................................ 1
• Solvent Cleaner ...........................As needed
• Rags for cleaning ........................As needed
The Model G1005Z was carefully packed when it
left our warehouse. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, you should inventory the
contents.
Unpacking
Items Needed for Set
Up
Wear safety glasses dur-
ing the entire set up pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Set Up Safety
The Model G1005Z is an
extremely heavy machine
(400 lbs). Serious per-
sonal injury may occur
if safe moving methods
are not followed. To be
safe, you will need power
equipment when mov-
ing the shipping crate,
and a number of assis-
tants when moving the
machine onto a stand or
workbench.