GE 00016 - Manual (Page 2)


Equipment Approval Information
Your telephone equipment is approved for connection
to the Public Switched Telephone Network and is
in compliance with parts 15 and 68, FCC Rules and
Regulations and the Technical Requirements for Telephone
Terminal Equipment published by ACTA.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating,
among other information, the US number and Ringer
Equivalence Number (REN) for the equipment. You must,
upon request, provide this information to your telephone
company.
The REN is useful in determining the number of devices
you may connect to your telephone line and still have
all of these devices ring when your telephone number is
called. In most (but not all) areas, the sum of the RENs of all
devices connected to one line should not exceed 5. To be
certain of the number of devices you may connect to your
line as determined by the REN, you should contact your
local telephone company.
A plug and jack used to connect this equipment to the
premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements
adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed
to be connected to a compatible modular jack that is also
compliant. See installation instructions for details.