GE 00016 - Manual (Page 39)

9
Changing the Battery
CAUTION: To reduce the risk of fire or
personal injury, use only the Thomson Inc.
approved Nickel-Cadmium (Ni-Cd) battery
model 5-2459 or Nickel Metal Hydride
battery model 5-2522, that is compatible
with this unit.
1. Make sure the telephone is OFF (not in TALK mode)
before you replace battery.
. Remove the battery compartment door.
. Disconnect the cord attached to the battery pack and
remove the battery pack from the handset.
. Insert the new battery pack and connect the cord to
the jack inside the battery compartment.
5. Put the battery compartment door back on.
6. Place handset in the base to charge.
Allow the
handset battery to properly charge (for 16 hours)
prior to first use or when you install a new battery
pack. If you do not properly charge the phone,
battery performance will be compromised.