Onnecting a, Able, How to connect – GoVideo DV1040 User Manual

Page 14: How to watch regular tv and record cable tv

Advertising
background image

13

INST

ALLA

TION

C

ONNECTING A

C

ABLE

B

OX

How to connect

INPUT 1

IN

OUT

ANT IN

INPUT 2

DVD + VCR

R

L

VIDEO

OUT

VIDEO 1

IN

IN

(FROM ANT.)

OUT

(TO TV)

RF

AUDIO

VIDEO

OUT

OUT

IN

How to watch regular TV and record Cable TV

1

Set the Channel Select switch of the cable Box to CH 3. If Channel 3 is used by a TV station, you
must change it to Channel 4. See "To Set Output Channel" on page 23.

2

Select the channel to be recorded on the Cable Box. If you want to watch the show that is
recording, press [TV/INPUT] button on your TV to select “Out (VCR)”.

3

Press the [REC] button on the DVD+VCR.

4

To watch regular TV while you record from cable, select the desired channel on your TV.
Because of the nature of cable boxes, you cannot watch one Cable TV channel and record
another at the same time.

jack on the DVD+VCR to the IN or ANT jack on the rear of the TV.
1. Find the RF cable that goes into your cable box. Unplug it from the cable box and plug it into an

RF splitter (available at your local electronics store.)

2. Connect an RF cable between one OUT terminal on the splitter and the IN terminal on the cable

box.

3. Connect another RF cable between the other OUT terminal on the splitter and the A-IN terminal

on an A/B switch (available at your local electronics store.)

4. Connect a third RF cable between the OUT terminal on the cable box and the B-IN terminal on

the A/B switch.

5. Connect an RF cable between the OUT terminal on the A/B switch and the ANT. IN jack on your

DVD+VCR.

When the A/B switch is set to B, use the cable box control to change channels. When the A/B switch
is set to A, use the DVD+VCR remote to change channels.

Rear Panel of DVD+VCR

Cable Box

Rear Panel of TV

RF Cable

AUDIO/VIDEO Cable

RF Cable

RF Cable

A/B Switch

Splitter (Not supplied)

Cable Outlet

RF Cable

If your cable system
provides all your channels

(i.e., pay-TV channels), follow
these steps: connect an RF
Cable from the OUT jack of the
Cable Box to the IN jack on the
DVD+VCR unit. Then connect
another RF cable from the OUT

Advertising