GoVideo DV1040 - Manual (Page 19)

18
DVD P
LAYBACK
Press [√] to turn on the unit.
Press [DVD] to select DVD mode.
Press [OPEN/CLOSE] to open the disc tray.
Press [OPEN/CLOSE] to close the tray.
The disc tray is closed and many discs will start playback
automatically.
1
2
Place your disc in the center of the disc
tray, with the label facing upward. 3
4
To start playback, press [PLAY].
• In the case of DVD,
DVD menus and titles are often displayed on screen.
• In the case of S-VCD and VCD2.0:
The disc menus are displayed on screen and are converted into
PBC (Playback Back Control) mode.
• In the case of CD, VCD1.1 and MP3:
The disc plays in order of its track numbers.
5
To stop playback, press [ ].
To pause, press [PLAY] during playback.
Press [PLAY] again to resume playback.
6
Press [OPEN/CLOSE] to open the disc tray. 7
Remove the disc, and press [OPEN/CLOSE] to close the tray. 8
Various Playback Methods
■ For fast (or reverse) playback, press [ √√] (or [œœ ]) in Playback mode.
* Unavailable during MP3 playback and with certain DVDs.
■ For slow (or reverse) playback, press [√√] (or [œœ ]) in Pause mode.
* Not available during VCD playback. The mark will appear.
■ For still picture, press [PLAY] in Playback mode.
•If you do not close the
tray, it will be closed
automatically in 5
minutes to protect it
from damage.
•Some CD-R, CD-RW
(MP3, AUDIO CD)
may not play due to
disparities in
producing medium
(PC, CD-Recorder),
media type, and/or
disc format.