GoVideo DV1040 - Manual (Page 48)

47
DVD
FEA
TURE
SETUP
VIDEO S
ETUP
Selecting TV ASPECT.
If you select “4:3 LB”, you can watch the
original widescreen movie, but black bars
will appear above and below the picture.
If you select “4:3 PS”, the picture will fill
the screen but the sides of the movie will
be cropped.
If a disc size was recorded in 4:3, you
cannot watch it in wide screen even if TV ASPECT is set to “16:9
WIDE”.
2
■ To set the DVD+VCR to match the capabilities of your TV:
Selecting VIDEO OUT.
You may set VIDEO OUT to S-VIDEO or
COMPONENT.
* If VIDEO OUT is set to S-VIDEO, you cannot set
SCAN MODE. If VIDEO OUT is set to
COMPONENT, you can set SCAN MODE.
3
Selecting SCAN MODE.
You may set SCAN MODE to
INTERLACED or PROGRESSIVE.
* If SCAN MODE is set to “INTERLACED”, connect
Y/Pb/Pr on the DVD+VCR to the INTERLACED
input on your TV.
If SCAN MODE is set to “PROGRESSIVE”, connect Y/Pb/Pr on the DVD+VCR to the
PROGRESSIVE SCAN input on your TV.
4
While in Stop mode, press
[SETUP]. 1
TV ASPECT
VIDEO OUT
SCAN MODE 4:3 LB
COMPONENT
INTERLACED
TV ASPECT
VIDEO OUT
SCAN MODE
4:3 LB ✓
4:3 PS
16:9 WIDE
TV ASPECT
VIDEO OUT
SCAN MODE
S-VIDEO
COMPONENT
✓
TV ASPECT
VIDEO OUT
SCAN MODE INTERLACED ✓
PROGRESSIVE