GE EtherNAV D7600 Series - Manual (Page 34)

Step 8:
Press <esc> to a previous screen as shown in Step 3.
Step 9: Admin. Control
Highlight All Ports and press <enter> to configure at one time. Or move to
highlight each port and press <enter> to configure individually.
Step 10:
For Admin Control, move to highlight Up or Down from Admin Status Options.
Step 11:
The port is set as Admin Down to stop TX/RX transmission. To allow transmission on the
port, move to highlight Up from the options in Step 10.
User’s Manual 30
Manageable 8/9-Port Switch