GE EtherNAV D7600 Series - Manual (Page 7)

User’s Manual 3
Manageable 8/9-Port Switch
FRONT PANEL DISPLAY
10/100TX Port Status
(D7600-MM-E-CC Shown)
Optical Status 10/100/1000TX Port Status Power Indicator
1. Power Indicator
This LED comes on when the switch is properly connected to power.
2. Optical Status LED’s (FX)
The ACT LED’s come on when data is present.
(LED will flash at the rate data is transferred).
The LNK LED’s will be on for 100FX speed transmission.
3. 10/100/1000TX Port Status LED’s
The LED’s are located at each port, displaying status.
Please refer to the Table for more details.