GE EtherNAV D7600 Series - Manual (Page 35)

Step 12: Physical Port Address
Press <esc> to a previous screen as shown in Step 1.
Step 13:
Move to highlight Physical Address to view physical port address.
Step 14: Return to Basic Management
Press <esc> to return to [Basic Management] screen when completed.
Console Port Configurations
Step 1:
Move to highlight Console Port from [Basic Management] screen.
Step 2: Baud Rate
Baud Rate is highlighted. Press <enter> if you want to change the current console baud
rate.
Step 3: Flow Control
Press <esc> to return to [Basic Management] screen when completed.
Step 4: Modem Control
Step 5: Modem Setup String
Not Supported.
Step 6: Return to Basic Management
Press <esc> to return to [Basic Management] screen when completed.
User’s Manual 31
Manageable 8/9-Port Switch