GE 27959 - Manual (Page 12)

12
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
D
ISPLAY
C
ONTRAST
NOTE: This setting may only be made with the base.
1. Press the flash/program button until SET CONTRAST >1 2 3 shows in
the display. “ 1” is the default setting.
2. Press 1, 2 or 3 on the base touch-tone to enter your selection or use the
cid/messages ( < or > ) button on the base to scroll to your selection.
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
R
ING TO
A
NSWER
NOTE: This setting may only be made with the base.
You may set the number of times you want the phone to ring before the
answering system answers a call.
1. Press the flash/program button until RING TO ANSWER > 3, 5 TOLL
shows in the display. “ 5” is the default setting.
2. Press 3 or 5 or use the cid/messages (< or >) to scroll to 3, 5 or TOLL.
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
U
SING
T
OLL
S
AVER
Toll Saver can save you the cost of a toll call when accessing your
messages from another phone:
SET CONTRAST
>
1 2 3
RING TO ANSWER
3
>
5 TOLL