GE 27959 - Manual (Page 39)

39
3. Disconnect the battery plug from the jack inside the
battery compartment and remove the battery pack
from the handset.
4. Insert the new battery pack and reconnect the battery
plug to the jack inside the compartment.
5. Put the battery compartment cover back on.
6. Place handset in charge cradle to charge. If you don’t
charge the handset battery properly (for 12 hours)
when you first set up the phone and/or when you
install a new battery pack, the battery’s long-term
performance will be compromised.
NOTE: If the battery is not properly installed in the
handset, or if the battery pack is not properly connected to
the jack inside the battery compartment, “NO BATTERY”
shows in display when the handset is placed in the base cradle.
B
ATTERY
S
AFETY
P
RECAUTIONS
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of
this type, toxic materials could be released which can cause injury.
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
CAUTION: To reduce the risk of fire or personal injury, use only the
battery listed in the instruction book.
NOTE: The RBRC seal on the battery used in your
ATLINKS USA, Inc. product indicates that we are
participating in a program to collect and recycle
Nickel Cadmium batteries throughout the United
States. Please call 1-800-8-BATTERY for
information or contact your local recycling center.