GE CG709 - Manual (Page 36)

Titler
34
Creating a Title
1. Attach a power source, turn on the
camcorder, and place the CAMERA/
VCR switch in CAMERA.
2. Press TITLE to display the title page
graphics in the viewfinder.
3. Press TITLE SELECT to display the
other title page in the viewfinder.
4. Press EDIT ADV. to move the flashing
cursor to the place you want to begin
your title.
5. Select the first character for your title
by pressing TITLE SELECT + or –
until the character you want appears.
See the “Chart of Characters” for the
characters available in the titler’s
register.
The titler can create and store two different titles. Each title can contain two lines with
a total of 32 characters – 16 on each line. The built-in character register contains 47
different characters for creating titles.
POWER PAUSE REW PLAY F.FWD AUD • DUB • VID RECORD
STILL
POWER PAUSE REW PLAY F.FWD
TITLE SELECT
RECORD
STOP/EJECT BATT EJECT
REVIEW
CAMERA VCR AUTO MAN
COUNTER
DISPLAY RESET SELECT SET
CLOCK
DATE/TIME SHUTTER PUSH/AUTO
FOCUS AUTO MAN
FADE W/B
MANUAL FOCUS
AUD •DUB •VID
EDIT ADV.
TIME LAPSE
TITLE
SELF TIMER
STILL
TITLE SELECT EDIT ADV.
CAMERA/VCR Switch
TITLE Button
EDIT ADV. Button
TITLE SELECT + Button
TITLE SELECT – Button
TITLE SELECT Button
6. After you have selected the first
character, press EDIT ADV. to move
the flashing cursor to the next position
you want a character to appear.
If a blank space is desired, press EDIT
ADV. without selecting a character.
7. Repeat steps 4 – 6 until you have
completed the title.
Press TITLE SELECT if you want to
create a title on the other title page.
8. Press TITLE to remove the title from
the viewfinder and store it in memory.
Notes: The clock battery cell must be
installed to store the title.
Remove the title from the viewfinder for
normal recording.