Graham Field PATRIOT US0208 - Manual (Page 14)

US0208-INS-LAB-RevD11 • Patriot Homecare Bed 14
All models: Attach hi/lo rod to gearbox or motor shaft pins
Both ends of the hi/lo rod assembly have a slot to mount on the foot end motor shaft pins and bed
end gearbox shaft pins. Follow steps 2-3 to mount the hi/lo rod assembly on the gearboxes.
foot end gearbox
Fig 1: Semi-Electric Bed:
Attach hi/lo rod assembly
to foot end gearbox
Fig 2: Full-Electric Bed:
Attach hi/lo rod assembly
to foot end hi/lo motor shaft
foot end
head end gearbox
Fig 3: All Bed Models:
Attach hi/lo rod assembly
to head end gearbox
head end
end of hi/lo motor shaft
notch at end of hi/lo rod rests
over pin at end of motor shaft
end of hi/lo
rod (notch)
FOOT END
2. Connect the hi/lo rod assembly to the bed.
Semi-electric bed: Attach either end of hi/lo rod assembly to the foot end gearbox as shown
in Fig 1 above.
Full-electric bed: Attach either end of hi/lo rod assembly to the foot end hi/lo motor shaft as
shown in Fig 2 above.
3. Attach other end of hi/lo rod assembly to head end gearbox as shown in Fig 3 above.