Graham Field PATRIOT US0208 - Manual (Page 21)

US0208-INS-LAB-RevD11 • Patriot Homecare Bed 21
GF6580A-1: Low Universal Half Rail
GF6580A-1
Low Universal Half Rail
Cable tie
Spring Buttons
with cable tie
Secure crossbrace
to head deck angle
FOOTBOAR
D
Spring Buttons G3
A
G2
HEADBOARD
B
Follow same
procedure
for mounting
half rails on
foot-end using
G3 slots.
MINIMUM OF 9.25"
SUGGESTED
RAIL TO HEADBOARD
Head end: Position spring-loaded crossbrace #B into slots G2 on both sides of bed. Position cross-
brace #A so that the stabilizer rests underneath the head deck angle. Secure the crossbrace to the
head deck angle with a cable tie. Ensure spring buttons face inward as shown above.
Info: Suggested rail-to-headboard minimum is 9.25 inches.
Foot end: Position spring-loaded crossbrace #B into slots G3 on both sides of bed. Position cross-
brace #A so that the stabilizer rests underneath the foot deck angle. Secure the crossbrace to the
foot deck angle with a cable tie. Ensure spring buttons face inward as shown at head end above.