Installation instructions, Installation, Lighting the studio – Stovax STUDIO 8700CFCHEC User Manual

Page 21

Advertising
background image

21

INSTALLATION INSTRUCTIONS

INSTALLATION

36

AR1862


• Close the window

5.5 Using the allen key provided:

• Close the window locks by moving from open to shut

towards the window centre

37

AR1860

6. LIGHTING THE STUDIO

Note: The Emergency Shut Off switch must be in the ON

position, refer to Section 2, User Instructions.

There are two ways of lighting the Studio:

• by thermostatic remote control

• using the fire’s touch pad

THERMOSTATIC REMOTE CONTROL

38

AR1883

Turning the Studio On

Your remote can control the gas fire from pilot ignition

through to shut down.

To turn the fire on:

• Press the OFF buton and the UP arrow simultaneously

The pilot and main burner ignite and the remote is now in

Manual Mode. In 'MANUAL MODE' you can:

• turn on the main burner

• regulate the fame from low to high and back

TOUCH PAD CONTROL

39

AR1885

• Press the ON-OFF button to light the appliance, (up to

30 seconds)

• Press the UP button to increase the flame height

• Press the DOWN button to decrease the flame height. At

the lowest point it goes to ‘standby mode’, (only pilot

lit)

• Press the ON-OFF button to turn the appliance off

Advertising
This manual is related to the following products: