Stovax STUDIO 8700CFCHEC - Manual (Page 25)

25
AR1862
3
3.3 With the window frame in an upright position:
• Slide the frame to the left so that it comes off the left
hinge pin
Still keeping the frame upright:
• Drop the left side down and forward slightly, Diagram 4
4
AR1863
• Slide the frame to the right so that the frame comes off
the right hinge pin. The window frame is now free.
• Refit in reverse order
1. GENERAL
1.1 All main components can be replaced without removing the
stove from its installation. i
T is EssENTial ThaT ThE gas supply
TO ThE sTOvE is TurNEd Off aT ThE isOlaTiON dEvicE bEfOrE
prOcEEdiNg furThEr .
2. DECORATIVE FRAME
2.1 The same method is used to remove each frame.
• Lift the frame upwards off the four support brackets,
Diagram 1
1
NOTE: THE STEEL FRAME IS HEAVY. TAkE CARE WHEN
LIFTING
3. WINDOW FRAME ASSEMBLY
3.1 To open the glass door, use the allen key provided:
• Release the two window locks
The lock needs to be moved from shut to open towards the
outer edges, Diagram 2
2
AR1860
3.2 To completely remove the glass front:
• Remove the securing spring clip from the bottom-right of
the window frame, Diagram 3
SERVICING INSTRUCTIONS
REPLACING PARTS