Graham Field GRAFCO 14423-8 - Manual (Page 21)

14423-INS-LAB-RevD11 21
Swapping Probes
s
NOTICE: Do not drag or drop the probe or the probe
connector.
The Pocket Doppler is shipped with one probe connected.
To replace the connected probe with another Pocket Dop-
pler probe:
1. Follow steps 1-3 in previous section, Removing the
Probe from the Pocket Doppler.
2. Remove the connector: Grasp
probe connector body and gen-
tly pull out from Pocket Doppler
probe socket.
3. Connect the new probe's con-
nector: Grasp probe connec-
tor body and gently insert into
Pocket Doppler's probe socket.
Pocket Doppler is shown at
right with disconnected probe.
s
NOTICE: Place the unused probe in a secure location.
When the Pocket Doppler is not used for a long time,
store Doppler and probe in original packaging (see
Maintenance/Storage section for proper storage con-
ditions).
TURNING ON THE POCKET DOPPLER
Press the front panel POWER button to turn on the Pocket
Doppler.