Graco 258906 - Manual (Page 15)

Motor Control Board
3A0246C 15
12. Remove top two screws (61) and control box (3).
13. Disconnect transducer connector from motor control
board (24).
14. Disconnect three motor connectors from motor con-
trol board to motor.
15. Remove two screws (83) holding motor control
board / heat sink assembly to power module frame.
Remove motor control board/heat sink assembly.
16. Remove six outer screws, two inner screws, and
remove control board (24) from heat sink.
ti15912a
3
61
ti12999a
24
ti15847a
ti15845a
83
ti15844a
24