Startup, 9setting up the vcr, Select the language/escoge una lengua – GE VGN550 User Manual

Page 11

Advertising
background image

9

Setting Up the VCR

Startup

7.

Select the language/Escoge una lengua.

This feature lets you select English or Spanish as the language for
your on-screen menus.

A

. Press MENU•PROG on remote to see VCR MAIN MENU on the

TV screen.

B

. Press 5 to display the LANGUAGE menu.

¥ Press 1 to display the menus in English.
¥ Press 2 to to display the menus in Spanish.

8.

Place channels in the VCR’s memory.

Channels 2 through 13 including line inputs (L1 and L2) are in the
VCRÕs memory when you first turn it on. The VCR stops on these
channels when you press CHANNEL up or down. To get
additional channels available on your antenna or cable system,
you must use the Auto Channel Search feature of the VCR. If you
ever change cable or antenna signals, you may need to auto
channel search again.

See Cable Box Setup on page 28.

A

. Press VCR1 to set remote to control VCR.

B

. Press MENU•PROG on the remote to see the VCR MAIN MENU

on the TV screen.

If the menu does not appear on the TV screen:

¥ Press VCR1 and then press MENU•PROG.
¥ If you have used one of the basic hookups, make sure the

TV is tuned to the same channel (3 or 4) as the Output
Channel

selected in the PREFERENCES menu.

Check VCR indicator in display panel Ñ it should be on.
Press TV•VCR to turn it on.

¥ If you have connected your VCR using one of the advanced

hookups, tune your TV to its video input (refer to TV
OwnerÕs manual).

¥ Check the connections.

C

. Press 3 to select CHANNELS.

D

. Press 1 to begin Auto Channel Search.

Wait until the channel numbers stop changing. The TV will
then tune to the lowest channel found. Press CHANNEL up or
down to select the active channels.

The VCR automatically selects ANTENNA or CABLE for the
Signal Type

feature in the CHANNELS menu. If you need to

change the setting manually, press 3.

VCR MAIN MENU

1 Timer Recordings
2 Set Clock
3 Channels

CHANNELS

1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 Cable Box Setup

0 Exit

VCR MAIN MENU

1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
5 Language

LANGUAGE/IDIOMA

Select a language.
Escoge una lengua.

1 English (Inglés)
2 Spanish (Español)

Press MENU to continue

Advertising