GE VGN550 - Manual (Page 16)

14
Using the Remote Control
Controlling a VCR
The VCRÕs remote controls two compatible GE, RCA, or ProScan VCRs with the
VCR1
and VCR2•LD buttons. Most compatible VCRs automatically respond to
VCR1 without being programmed. If you own two compatible VCRs, test them
to see if VCR1 turns on both VCRs. If it does, then you may want to program
this VCR to respond to the VCR2•LD button on the remote.
Program the VCR for Remote Control
Set the Remote Control feature of the VCR to the
VCR1
or VCR2•LD position. The remote then
controls the VCR with either the VCR1 or VCR2•LD
button Ñ whichever position you select in the
menu.
1 . Press MENU•PROG to display the VCR MAIN
MENU .
2 . Press 4 to display PREFERENCES.
3 . Press 1 to activate the Remote Control feature.
4 . Press VCR1 or VCR2•LD to change the setting
and program this VCR to respond to the VCR1
or VCR2•LD button Ñ whichever you select.
Important Reminder: Remember you must
press VCR1 or VCR2•LD on the remote Ñ
whichever you selected in the menu Ñ
before the remote will operate this VCR.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
PREFERENCES
1 Remote Control: VCR1
2 Front Panel: AUTO
3 Output Channel: 3
4 Play NTSC as: NTSC
PREFERENCES
1 Remote Control: VCR1
2 Front Panel: AUTO
3 Output Channel: 3
4 Play NTSC as: NTSC
Press VCR2 to change