GE VGN550 - Manual (Page 35)

33
References
Location of Controls
CHANNEL/ TRACKING ( Up or Down)
Selects next higher or lower channel in
the VCRÕs channel memory.
Adjusts tracking when a tape is playing.
EJECT
Press when the VCR is stopped to eject
the cassette.
FWD (Fast Forward)
Fast forwards the tape when the VCR is
stopped.
Searches the picture forward during
playback.
INPUT
Turns the line input on or off. L1 or L2
appears in VCRÕs display panel and
VIDEO1
or VIDEO2 appears on the TV
screen.
Line input refers to the signal coming
from the component connected to the
audio/video input jacks on the back (L1)
of the VCR or front (L2) of the VCR.
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent recording of
unwanted scenes.
PLAY
Plays a tape.
POWER
Turns the VCR on or off.
RECORD
Starts VCR recording.
Used for one touch recording.
Remote Sensor
Receives signals from the remote control.
Aim the remote at this sensor with no
objects between them.
REW
Rewinds the tape when the VCR is
stopped.
Searches the picture in reverse during
playback.
STOP
Stops the normal functions such as record,
playback, rewind, fast forward, or pause.
TV•VCR
Switches the picture signal so that it either
comes from the VCR or the TV channel.
See page 11.
VIDEO and AUDIO (R and L•MONO) IN
Jacks
Receives signals from another component,
like a VCR or camcorder, when it is
connected to these jacks.
Use INPUT to select L2 in the VCRÕs
display panel to record from these jacks.
Front Panel
Tape Compartment
Remote Sensor