GE VGN550 - Manual (Page 13)

11
Setting Up the VCR
Startup
11. Set the time and date.
When you first turn on the VCR, Р Р : Р Р appears in the
clock area of the VCRÕs display panel.
A . Press MENU•PROG on remote to see VCR MAIN
MENU on the TV screen.
B . Press 2 to display SET CLOCK.
C . Enter the time and date with the number buttons on
the remote.
¥ Press 0 before single-digit numbers.
Example: press 0, then 5, then 0, then 7 for a
time of 5:07. Press 1 for AM or 2 for PM.
¥ Press CLEAR on the remote to change incorrect
entries.
D . Press MENU•PROG to remove the SET CLOCK
menu from the TV screen and start the clock.
E . Press 0 to exit the menu system.
Whenever you press DISPLAY on the
remote, the time and date appear on the
TV screen and the time appears in the
display panel.
SLP VCR
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4 Preferences
5 Language
6 Audio
0 Exit
SET CLOCK
Time --:--
(hh:mm)
Date --/--/--
Press MENU to exit