Dvr i, Nstallation and, Iring – GE Interlogix BusSecure User Manual

Page 16

Advertising
background image

DVR Installation and Wiring

BusSecure User Manual

16

0150-0263A / May 2003

3

DVR I

NSTALLATION AND

W

IRING

A removable hard disk drive (HDD) is housed within the DVR that is mounted to the vehicle. All
connections are made through the terminals at the back of the unit. See Figure 22.

Removable HDD

DVR

Figure 20. DVR assembly

3.1 M

OUNTING THE

DVR

Note: The DVR can be mounted in various orientations
(except upside down), but you must leave enough space
to pull the latch and remove the HDD.

See Figure 21 and perform the following:

1) Mount the mounting plate (

) to the

vehicle using four nuts and bolts (not
provided) (1/4-20-inch bolts (

) are

recommended).

2) Remove the four acorn nuts (

) and

locking washers (

) from the top of the

vibration isolators (

) (Do not remove

the vibration isolators (

) or the bolts

and nuts holding them in place.)

3) Place the DVR outer housing (

) back

onto the mounting plate by lining up the
holes in the mounting brackets (

) with

the bolts in the vibration isolators.

4) Reattach the four acorn nuts and locking

washers.

Figure 21. Mounting the DVR

Advertising