GE Interlogix BusSecure - Manual (Page 7)

BusSecure User Manual Hardware Installation
0150-0263A / May 2003 7
2 H
ARDWARE
I
NSTALLATION
The BusSecure/DVR digital video recording system supports up to four cameras, and an optional impact
sensor, panic button, and microphone.
Note: Most BusSecure products are not supplied with mounting hardware. Exceptions are noted in the appropriate sections of the
manual.
2.1 T OOLS N ECESSARY FOR I NSTALLATION
Ÿ Laptop / viewing station
Ÿ Electrical volt meter
Ÿ BNC crimper
Ÿ Molex pin crimper
Ÿ Riv-nut gun
Ÿ Socket set up to 5/8 in.
Ÿ Wrenches up to 5/8 in.
Ÿ Phillips and flathead screwdrivers
Ÿ Solder gun with solder
Ÿ Wire strippers
Ÿ Drill
Ÿ Drill bits up to 5/8 in.
Ÿ Hole saws up to 1 1/8 in.
Ÿ Locktite (blue)
Ÿ Torx bit secured #10
Ÿ Wire snake
Ÿ Extension cords
Ÿ 8-in. tie wraps
Ÿ Electrical tape
Ÿ Heat shrink
Ÿ Spare BNCs
Ÿ Molex pins and 4-pin housing
Ÿ Electrical connections (ends, lugs, etc.)
Ÿ P1, and P2 terminal blocks
Ÿ General tools