GE 1019070 - Manual (Page 18)

2.2.5 Service command group
The service command group allows to enable/disable different services. Note that the local (serial)
connection cannot be disabled.
Command Parameters Description
on | off
Enable/disable HTTP server (port:80)
on
Web server enabled
off Web server disabled
http-server
on | off
Enable/disable HTTPS server (port:443)
on
Secure web server enabled
off Secure web server disabled
https-server
ssh-server on | off
Enable/disable SSH encryption (port:22)
on
SSH encryption enabled
off SSH encryption disabled
NOTE: SSH encryption enables / disables both SSH (Secure
SHell) and SFTP (Secure FTP)
ftp-server on | off
Enable/disable FTP server (port:21)
on
FTP server enabled
off FTP server disabled
Enable/disable Telnet server (port:23)
telnet-server on | off
on Telnet server enabled
off Telnet server disabled
makecert
Create new digital certificate for the HTTPS server (*)
sitename
The DNS name / IP address of the adapter
sitename
Show the SSH key fingerprint (*) ssh-fingerprint
Show the web server digital certificate fingerprint (also
known as thumbnail) (*)
ssl-fingerprint
Show the digital certificate fingerprint (also known as
thumbnail) for the CA Root Certificate (*)
ca-fingerprint
showftp Show FTP server info and connections
showlogin Show detailed telnet/ssh login information
(*) Refer to the Encryption section for details.
Modifications reserved Page 18/58
OPM_CNT_SNM_BAS_CRD_1GB_V012.doc Operating Manual SNMP/Web Adapter