GE 1019070 - Manual (Page 17)

2.2.4 User command group
The user command group is available only to the supervisor user, the only user who can perform user
management.
Command Parameters Description
supername [name]
Change supervisor login name
[name] New supervisor username
NOTE: By default, the superuser is the only configured user
with username and password set to ge and ge.
showuser Show user settings
Add a user
[user]
username for the new user
[telnet] 1 – access allowed / 0 – not allowed
[http]
1 – access allowed / 0 – not allowed
[ftp] 1 – access allowed / 0 – not allowed
[access] ‘ro’ – read-only / ‘rw’ – read/write
[user]
[http]
[telnet]
[ftp]
[access]
adduser
NOTE: After entering the command, the console prompts for
the password, which needs to be re-confirmed.
Mind that the password length is limited to 8 chars.
The command line interface may accept longer passwords,
although only the first 8 characters are significant.
deluser [name]
Delete a user
[name] User to be deleted
moduser
[user]
[http]
[telnet]
[ftp]
[access]
Modify services and access rights for a user
[user]
username for the new user
[telnet] 1 – access allowed / 0 – not allowed
[http]
1 – access allowed / 0 – not allowed
[ftp] 1 – access allowed / 0 – not allowed
[access] ‘ro’ – read-only / ‘rw’ – read/write
NOTE: The indicated services refer to the following access methods:
Web interface Controls access with both HTTP and HTTPS protocols http
Remote console interface Controls access with both Telnet and SSH (Secure SHell)
protocols plus SFTP (Secure FTP)
telnet
File transfer Controls access with FTP
ftp
NOTE: Both username and passwords are case sensitive. It is recommended to always use lower case
for both.
Modifications reserved Page 17/58
OPM_CNT_SNM_BAS_CRD_1GB_V012.doc Operating Manual SNMP/Web Adapter