GBC VOYAGER 3 930-032 - Manual (Page 22)

Operations Manual: Specifications
Voyager 3 Voyager 3
2004 General Binding Corporation Page 3-2
Ambient Air Temp: 5°-40° C
Humidity Rating: 30%-95% (Non-Condensing)
Altitude Rating: 1000 Meter Minimum
3.2 Feeder Specifications
Minimum sheet sizes: 8.5” x 11” (21.6 x 28 cm) (8.5” side forward)
Maximum sheet size: 30” x 40” (76.2 x 101.6 cm) (30” side forward)
Paper range: 80lb text C1S to 14pt cover (115 to 300 g/m2)
Operating Speed: 0 - 10 000 sheets/hr for all paper types listed under
paper range and for sheet lengths according “Chart
#1 in Sec. H”
Max. Paper Load Height: 30 in (7600 mm)
In-feed pile weight: 1940 lb (880 kg )
Laminator Connection Height: 33.5 in (850 mm) (Angle 10˚ or less)
Operation: Continuous
1 Revolution of input shaft = 1 feeder head cycle
= 1 gate cam revolution = conveyor movement 197 mm
Rotation of feeder input shaft: Counter clockwise (looking from DRIVE side)
Sheets overlap on conveyor: 197 mm (recommended)
Feeder Head: Two system feeder head (recommended)
Type: lifting suckers (recommended)
- forwarding suckers (recommended)
Blowers: Blower design for feeding with short side forward.
(Sheet direction is opposite than on printing presses)
( 1) foot blower and (2) cushion blowers
(2) front side blowers on the side guides
Adjustments: Horizontal linear mechanism for 11 – 40” paper
with sheet length scale
Vertical feeder head height adjustment
min.
3 / 4 ” (19 mm)