Stovax Huntingdon 30 - Manual (Page 21)

NG LPG
COMPONENT G20 G31
20mb 37mb
MAIN INJECTOR IN0001 IN0054
AERATION PLATE ME4066 ME4954
PILOT INJECTOR PI0036 PI0037
BURNER ASSEMBLY B0214 PB0214
THERMOCOUPLE PI0010
MAGNETIC UNIT GC0092
ELECTRODE PI0053
GAS VALVE GC0088K**
IGNITION LEAD GC0090
FRONT COAL CE0122
FLAME BAFFLE CE0118
REAR PANEL GC0135
COAL SET GC0127
TTB SENSOR EL0001
SENSOR LEAD EL0064
INTERRUPTER GC0029
STANDARD UPGRADE KIT 8455
THERMO UPGRADE KIT 8456
** Note :- The control valve is factory preset for correct gas type and
model.
13. SHORT SPARES LIST
21
SERVICING INSTRUCTIONS
REPLACING PARTS
• Reassemble in reverse order with the correct aeration
plate.
In order to change between gas types, it will be necessary
to change the following items.
• Pilot Injector
• Control Valve**
• Main Injector
• Aeration Plate
• Data badge
The relevant parts can be ordered from Gazco, always
quote the appliance type and serial number when ordering
spare parts.
** NOTE: THE CONTROL VALVE IS FACTORY PRESET
FOR CORRECT GAS TYPE AND MODEL, A NEW UNIT
WILL NEED TO BE ORDERED WHEN CHANGING
BETWEEN GAS TYPES.
See Installation Instructions, Section 1.
12. CONTROL UPGARDE
11. CHANGING BETWEEN GAS TYPES
AR1441
19