Gyration Full-Size Keyboard User Manual
Insert four AA batteries into the keyboard.
Press and hold the Learn button on the receiver for two
seconds, and then release it. The Status light will blink
slowly, indicating the receiver is in “Learn Mode.”
Press and release the Teach button located on the back
of the keyboard (see below). The Status light on the
receiver will blink rapidly for four seconds, then begin to
At this time, press the Teach button on any additional devices
(such as a second keyboard, an Ultra Mouse, or a GyroRe-
To exit Learn Mode, press the Learn button on the
receiver for two seconds. Otherwise, Learn Mode will
automatically time out after five minutes.
If more than one Gyration device is being installed on the
same system, place the receiver into Learn Mode (step 3