Cd player – Grundig CDS2500IPW User Manual

Page 12

Advertising
background image

CD PLAYER

8

9

WARNING! THIS PRODUCT USES A CLASS 1 LASER.

AVOID ANY DIRECT EXPOSURE TO THE LASER BEAM.

USE OF CONTROLS, ADJUSTMENTS OR PROCEDURES NOT LISTED IN THIS GUIDE MAY RESULT IN HAZARDOUS
EXPOSURE.
HANDLING COMPACT DISCS

To remove a CD from its storage case, press down on the centre of the case and lift the disc out.

Hold the disc by the edges. Avoid touching the recorded side of the disc.
Compatible Compact Discs

Only compact discs identified with the mark shown opposite can be used with
your CD player.

LOADING AND PLAYING CD DISCS

1. Please the FUNCTION button until CD appears on the LCD display.
2. To open the CD lid press the

. The LCD display shows Open.

3. Place the CD in the compartment with the label side facing upwards.
4.

Close the CD lid. The LCD shows CD READ then total number of tracks.

5. Press the PLAY button to start playback, the LCD display will show the track number playing

and time played.

REMOVING CDS

1.

Press the

button, the CD will stop playing. The LCD will display Stop and the number of tracks

and play time of the CD.

2.

Wait until the CD stops spinning then press

to open the CD lid. Remove the disc then

close the CD lid.

CAUTION! Do not put anything other than a CD into the compartment. Other objects may damage the

CD mechanism. Do not force the lid to open further than the mechanism allows. Keep the lid closed when not in

use to prevent dirt and dust from entering the mechanism. Never insert more than one CD at a time. If a CD is deeply
scratched or too dirty, it may not play.

PAUSE

1.

To stop a track temporarily, press the

button The CD will pause at the current play position.

The played time will flash on the display.

2.

To resume play, press the

button on the remote control.

Advertising
This manual is related to the following products: