Grundig CDS2500IPW - Manual (Page 8)

CLOCK TIMER & SLEEP
5
ENGLISH
TIMER SETTING
1. When the unit is powered on or the timer on is deactived, press and hold the
TIMER button more than 1 Second, ON (timer on) will be shown on the display.
2. Press or button to set the hours. Press TIMER button to
store.
3. Press or button to set the minutes. Press TIMER button to
store. OFF (timer off) will be shown on the display.
4. Repeat the step 2 and 3 to set hours and minutes to set timer OFF.
5. Press or button to select desired source TUNER,iPOD or CD.
Press TIMER button to store.
6. Press or button to set the volume level. Press TIMER
button to store.
7. Switch the system to standby mode. When reaching the preset time, the selected source will play
and switch off at the preset timer off time.
Active timer is indicated by showing on the display.
NOTE


DEACTIVATE THE TIMER
•
Press TIMER button to deactivate this function, will disappear from the display. To activate the
timer again with the preset time, press the TIME button again.
• To cancel active timer until next day, press the STANDBY button.
SLEEP FUNCTION
SLEEP mode will be activated once SLEEP button is pressed on the remote handset. By pressing one at
a time the SLEEP timer will change to 90, 80, 70, 60, 50, 40, 30, 20, 10 minutes and OFF.
1. Swith the unit to standby mode.
2. Press and hold the MEMORY/CLOCK button more than 1 second. Press or button to
set 24 HOUR or 12 HOUR.Press MEMORY/CLOCK button to store.
3. Press or to set the hours. Press MEMORY/CLOCK button to store.
4. Press or to set the minutes. Press MEMORY/CLOCK button to store.
ENGLISH
CLOCK SETTING
•
than 10 Se
selected automati
Make absolutely sure that the clock is set to the correct time before setting the timer
• The timer setting will automatically cancelled if no button is being pressed for more
conds.
• If the selected source CD is not available when activated by timer, TUNER will be
cally instead.