Stovax Stockton 7162 - Manual (Page 22)

22
INsTAllATIoN INsTRUCTIoNs
PR7211a
• Replace in reverse order
4. FITTING ANd ReMoVAl oF
THe BAFFles
4.1 The appliance is fitted with a baffle in the top of the firebox
to maintain efficient combustion
4.2 Allow the stove to cool fully before removing the baffle
system.
4.3 To remove the baffle:
• Remove the log guard from the stove for access
• Lift the front edge of the baffle to clear the support bars
• Pull the baffle forward to disengage the rear edge from
the location above air inlet holes
• Rotate the baffle to remove from the firebox through the
door opening.
PR7214
Support Pin
• Replace in reverse order
PR7076
Front
4.6 Remove and clean the baffle system to ensure the flue ways
are clear of soot and debris and to ensure the safe, efficient
operation of the stove. The frequency of cleaning will
depend on the stove operating conditions.
4.7 The baffle system is designed to give safe and efficient
operation of the stove. Replace any damaged baffles
immediately.
4.8 Do not modify the baffle system.
5A. FITTING MUlTI-FUel KIT To Wood
sToVe (oPTIoNAl) sToCKToN 5/6/7/8
5.1 These instructions cover the fitting of the optional multi-
fuel kit to a wood burning appliance, in order to burn
manufactured smokeless fuels as listed in the User
Instructions.
5.2 To fit the Multi-fuel kit:
• Remove the log retainer if fitted.
• Remove the fire bricks
• Remove the blanking bolt, fitted in the grate operating
rod hole, on the front of the stove (Near the lower left-hand
corner of the door)
stockton 5/6/7/8
Centre Grate
Operating Rod
Lock Nut
Operating Knob
Main Grate
Door Seal
Fixing Bolts
Ashpan
Ashpan Tool
Operating Tool
PR7207