Gaggenau VC 422-610 - Manual (Page 10)

Visual signals
8
Luminous disc Indicator Signification Cause / Remedy
behind the on the
control knob cooker
lights OFF appliance is switched OFF
light constantly cooking zone ON normal use
slow flashing of residual heat The appliance is too hot to be
indicator light display touched safely.
(long OFF, short ON)
fast flashing of a holiday safeguard The appliance setting has not been
luminous disc changed for over 4 hours. Turn
control knobs to 0 and then switch
on again if required.
fast flashing of power cut After a power cut, the appliance
both control knobs stays switched off for safety
reasons. Turn control knobs to 0
and then switch on again if
required.
fast flashing of faulty installation Connecting cable between the
both luminous discs appliance and the control panel
alternately is not plugged in. Check that cable
is plugged in firmly.