Gaggenau VC 422-610 - Manual (Page 22)

Installing the cooktop • Firmly plug the connecting cable in the cooktop
and in the control panel (the plugs must lock into
place).
• Turn the clamping screws to the side. Insert the
hob with the control panel on the front into the
cut-out and align it.
Note: do not stick the hob onto the worktop with
silicone.
• Turn the clamping screws under the countertop
and tighten them evenly. Do not tighten the
clamping screws too tightly, as a uniform sealing
gap should be left all round.
• Connect the appliance to the electricity. Test that
it functions correctly. If the luminous discs behind
both control knobs blink alternately, check the
connecting cable between the appliance and the
control panel is firmly plugged in.
20 9000030301 en 12.04 EB