GIGABYTE GA-7vkml - Manual (Page 23)

English
Hardware Installation Process - 19 -
1) CPU_FAN (CPU FAN Connector)
2) SYS_FAN (System FAN Connector)
3) ATX (ATX Power)
Ø Please note, a proper installation of the CPU
cooler is essential to prevent the CPU from run
ning under abnormal condition or damaged by
overheating.The CP U fan connector supports
Max. current up to 600mA .
Ø AC power cord should only be connected to
your pow er supply unit after ATX pow er cable
and other related devices are firmly connected
to the mainboard.
+12V/Control
GND
1
Sense
+12V/Control
GND
1
Sense
Ø This connector allows you to link with
the cooling fan on the sy stem case to
lower the sy stem temperature.
PS-ON(Soft On/Off)
3.3V
GND
GND
GND
GND
VCC
VCC
-12V
20
-5V
1
5V SB (Stand by +5V)
3.3V
3.3V
GND
GND
GND
VCC
VCC
+12V
Power Good